Engineering Silver-Enriched Copper Core-Shell Electrocatalysts to Enhance the Production of Ethylene and C2+ Chemicals from Carbon Dioxide at Low Cell Potentials

Copper catalysts are widely studied for the electroreduction of carbon dioxide (CO₂) to value-added hydrocarbon products. Controlling the surface composition of copper nanomaterials may provide the electronic and structural properties necessary for carbon-carbon coupling, thus increasing the Faradaic efficiency (FE) towards ethylene and other multi-carbon (C₂₊) products. Synthesis and catalytic study of silver-coated copper nanoparticles (Cu@Ag NPs) for the reduction of CO₂ are presented. Bimetallic CuAg NPs are typically difficult to produce due to the bulk immiscibility between these two metals. Slow injection of the silver precursor, concentrations of organic capping agents, and gas environment proved critical to control the size and metal distribution of the Cu@Ag NPs. The optimized Cu@Ag electrocatalyst exhibited a very low onset cell potential of −2.25 V for ethylene formation, reaching a FE towards C₂₊ products (FE_C2+) of 43% at −2.50 V, which is 1.0 V lower than a reference Cu catalyst to reach a similar FE_C2+. The high ethylene formation at low potentials is attributed to enhanced C C coupling on the Ag enriched shell of the Cu@Ag electrocatalysts. This study offers a new catalyst design towards increasing the efficiency for the electroreduction of CO₂ to value-added chemicals.     

基于Prophet人工智能算法的网络潮汐效应预测研究

本文使用Prophet人工智能算法研究与预测移动通信网络“潮汐效应”现象，探索网络“潮汐效应”在优化网络资源配置实现网络降本增效的作用。Prophet人工智能算法是一种简单、有效，且易于实现的人工智能算法。通过facebook的人工智能开源框架fbprophet，研究4G网络PRB利用率等网络资源指标的“潮汐效应”，并预测这些网络资源指标在未来的变化趋势，用来指导当前4G网络减容、扩容和4/5G节电节能等，实现优化网络资源配置达到降本增效的目的。     

循环水替代7℃水在氯乙烯精馏装置中的应用研究

详细计算了PVC生产精馏系统换热设备的热负荷、循环水量及运行成本,认为通过调整系统的运行温度和压力,精馏装置使用循环水替代7℃水具有可行性,这将有利于突破能耗高的技术瓶颈,最大程度地发挥节能降耗、减污增效的潜能。     

基于Matlab的量子激光雷达稳频通信模拟系统设计

传统通信模拟系统设计较为复杂,导致模拟过程消耗能量较大,不能准确模拟稳频通信质量。因此,提出基于Matlab的量子激光雷达稳频通信模拟系统。由于振荡器是雷达形成初始信号源的基础,通过分析振荡电路与相位噪声,获得相位噪声函数与通信频率存在的关系;为确保通信过程的稳定,将准确性与稳定性作为信号质量的评价指标,并采用锁频环稳频技术计算频率偏移程度,根据PID控制算法控制频率,量子激光雷达稳频通信;利用Matlab确定激光器、探测器等硬件组成结构,通过时序与数字阵列的设置完成模拟系统设计。仿真结果表明所提系统结构简便、性能稳定,能够真实模拟出稳频通信的信号质量。     

Cryptographic Lightweight Encryption Algorithm with Dimensionality Reduction in Edge Computing

Edge Computing is one of the radically evolving systems through generations as it is able to effectively meet the data saving standards of consumers, providers and the workers. Requisition for Edge Computing based items have been increasing tremendously. Apart from the advantages it holds, there remain lots of objections and restrictions, which hinders it from accomplishing the need of consumers all around the world. Some of the limitations are constraints on computing and hardware, functions and accessibility, remote administration and connectivity. There is also a backlog in security due to its inability to create a trust between devices involved in encryption and decryption. This is because security of data greatly depends upon faster encryption and decryption in order to transfer it. In addition, its devices are considerably exposed to side channel attacks, including Power Analysis attacks that are capable of overturning the process. Constrained space and the ability of it is one of the most challenging tasks. To prevail over from this issue we are proposing a Cryptographic Lightweight Encryption Algorithm with Dimensionality Reduction in Edge Computing. The t-Distributed Stochastic Neighbor Embedding is one of the efficient dimensionality reduction technique that greatly decreases the size of the non-linear data. The three dimensional image data obtained from the system, which are connected with it, are dimensionally reduced, and then lightweight encryption algorithm is employed. Hence, the security backlog can be solved effectively using this method.     

马尔可夫跳变线性系统最优控制的研究现状与进展

马尔可夫跳变线性系统（MJLS）是一种具有多个模态的随机系统，系统在各个模态之间的跳变转移由一组马尔可夫链来决定。MJLS模型因其在表示过程中可以产生突变而更能精确的描述实际工程应用中的系统。近年来，MJLS的最优控制问题成为了研究的热点，动态规划、极大值原理以及线性矩阵不等式等成为了解决此类问题的主流方法。本文对MJLS最优控制领域的研究现状进行了综述。分别对一般情况下、带有噪声的情况下、带有时滞的情况下以及某些特定情况下的MLJS最优控制问题的国内外研究现状进行论述。最后进行了总结并提出MJLS最优控制领域未来值得关注的研究方向。     

Eco-driving: the role of feedback in reducing emissions from everyday driving behaviours

Eco-driving has been proposed as an approach to significantly reduce greenhouse gas emissions arising from personal automobile use. Eco-driving is the adoption of a measured driving style, minimising unnecessary breaking and aggressive acceleration. Eco-driving can be seen as a low cost and immediate approach to emission reduction as it involves the modification of drivers’ behaviours as opposed to the development and implementation of newer, more efficient technology. Despite the proposed benefits of eco-driving, numerous challenges are faced in order to encourage the adoption of these behaviours and maintain them long term. This narrative review presents the concept of eco-driving, with a focus on the long-term maintenance of these behaviours, including training programmes and feedback devices. It is clear within current literature that, despite the economic and environmental benefits of adopting eco-driving, drivers require feedback on their actions in order to promote long-term, behavioural, change.     

奥钢联板坯铸机驱动力报警问题的分析及改进

浇铸过程中，驱动力报警会导致紧急停浇甚至滞坯事故发生。为防止事故发生，通常采用降速、强冷等措施，但降速造成成本浪费，强冷又产生裂纹等质量缺陷，两者都难以满足生产需要。通过对铸机的各项参数对比分析，找到影响驱动力报警的主要原因为辊缝异常，轻压下模型参数、冷却工艺设置不合理等，通过调整二冷工艺、优化模型参数、加强轻压下区域扇形段辊缝维护，可以达到明显降低驱动力、消除报警的目的，从而保证连铸生产稳定。     

配加蒙古精矿对球团矿性能的影响

对蒙古精矿在包钢624 m2带式球团的合理利用进行了全面研究。研究表明，随着蒙古精矿配比增加，球团矿品位提高，还原膨胀率增加，当配比小于20%时，还原膨胀率小于20.0%，主要是由于还原后球团矿矿物组成中析出大量金属铁，在浮氏体(FexO)转变为铁的阶段，铁晶粒自浮士体表面向外长出晶须，晶须的生长让晶粒产生位移或晶粒开裂，导致球团结构疏松发生膨胀。通过添加适量矽石，可显著降低球团还原膨胀率，当配加30%～50%的蒙古精矿时，可通过添加1.0%～2.0%的矽石，将球团还原膨胀率降低至20%以内，球团矿质量满足高炉冶炼生产要求。     

Fundamentals of hydrogen storage processes over Ru/SiO2 and Ru/Vulcan

Hydrogen adsorption and desorption over Ru/SiO₂ and Ru/Vulcan are investigated in terms of hydrogen storage and release characteristics by both dynamic and static experiments. Ru particle dispersions as a function of metal loading were determined by HR-TEM and volumetric chemisorption experiments. Vulcan was more accommodating for spillover hydrogen than SiO₂. High Ru dispersions, i.e., small particle sizes, favored the amount of hydrogen spillover to Vulcan, as revealed by temperature programmed desorption (TPD) of hydrogen. TPD of hydrogen under He flow experiments over Ru/SiO₂ and Ru/Vulcan materials revealed a low temperature process (up to 200 °C) attributed to desorption of weakly bound hydrogen from Ru metal surface. A high temperature process (above 450 °C) was attributed to diffusion of hydrogen from the support to the Ru particle and desorption at the Ru sites. Hydrogen adsorbs strongly on Ru metal, as indicated by the initial heats of H₂ adsorption measured as 100 kJ/mol over 1 wt% Ru/Vulcan by adsorption calorimetry. At higher coverages, heat of adsorption of hydrogen was measured as 10 kJ/mol. Low heat of adsorption of hydrogen at high coverages indicate multilayer weak adsorption of hydrogen over the storage material, which can desorb at lower temperatures.